|
DH
Series Hydraulic Dock Leveler
|
|
|
|
|
|
 |
|
|
|
The
"DH" Series hydraulic
leveler is value engineered
to meet both application
and budget constraints
while maimizing prod-
uctivity, optimizing
efficiency adn improving
safety. From superior
structural design to
unlimited operator
features, the "DH" Series
hydraulic leveler is a wise
investment. |
|
|
|
|
|
|
|
| Standard
Features Include |
|
|
|
|
|
|
•
Simple Push Button Control
• Four Sided Box Construction - Deck Assembly
• Inverted Single Acting Hoist Cylinder
• Full Hydraulic Lip Activation
• Velocity Safety Stop
• Lockout/Tagout Maintenance Strut
|
|
•
Night Locks/Cross Traffic Support
• Motor Overload Protection
• Low Maintenance Design
• Full Range Toe Guards
• Two (2) B410-14 Laminated Bumpers
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
 |
|
|
Heavy
Duty Single Action Main Cylinder |
|
|
•
Inverted cylinder mount keeps hose
routing protected under deck.
• Chrome plated 3 1/2" rod with 3" ID
bore adds stability during ramp hoist
and "Lock-Up" conditions.
• Extenally mounted non-adjustable,
velocity safety fuse prevents free
fall
of loaded platform to 3". |
 |
|
|
|
|
|
|
| Structurally
Superior |
|
|
|
|
•
Over 29" of direct rear hinge support - heaviest
in the
industry.
• Four sided box construction provides unmatched
structural integrity.
• Deck construction is capacity dependent to insure
your
loading bridge matches the demands of the
approved
work load.
• Leveler lip and deck are constructed with high-strength
55,000 lb. yield, safety treadplate.
• Deck support members are application dependent |
|
|
|
|
|
|
|
|
|
Positive
Lip Extension |
•
Nickel plated lip cylinder for added corrosion
protection.
• Fully yield design to protect mechanism from
backing truck.
• Cushioned lip fall. |
|
|
|
|
|
|
| Clean
Sweep™ Frame |
•
Provides clear access to area
beneath platform.
• Allows easy removal of debris.
• Ideal where maintaining sanitary
standards is important. |
|
 |
|
Low
Capacity - Roll form "C" channel
Medium Capacity - Structural "C" channel
Heavy Capacity - Structural "C" channel and
"I" beam |
|
•
Close and consistent spacing of beams provide necessary
support for 3-wheeled and 4-wheeled fork
trucks. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Simple
Push Button Control |
|
|
|
|
|
|
|
|
Lockout/Tagout
Maintenance Struts |
•
Non-metallic Nema 4 single push button control.
• Control components are UL listed or recognized.
• Overload protection for motor is standard.
• Optional interlocking and integrated panels are
available. |
|
|
|
|
•
Permanently mounted, hinged
maintenance strut supports deck
during maintenance or inspection.
• Hinged maintenance strut lockout/
tagout capable. |
 |
|
|
|
|
|
|
|
| Efficient
Power Souce |
|
|
|
|
|
|
|
|
|
|
•
1.5 HP totally enclosed fan cooled
(TEFC) motor.
• 115v single phase motor (3 phase
optional).
• Translucent tank, fast fluid level
inspection.
• Elevated frame mounted design
keeps clear of debris.
• Integral cartridge valve is built into
pump.
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES
FOR DH SERIES MECHANICAL DOCK LEVELER
|
|
Size Model No. |
20,000 CIR |
25,000 CIR |
30,000 CIR |
35,000 CIR |
40,000 CIR |
45,000 CIR |
50,000 CIR |
60,000 CIR |
|
6' x 6' |
$4,463 |
$4,571 |
$4,737 |
$4,902 |
$5,253 |
$5,629 |
$5,801 |
$7,440 |
|
DH-66 |
1600# |
1675# |
1695# |
1775# |
1795# |
1895# |
1915# |
2505# |
|
6' x 8' |
$4,737 |
$4,845 |
$5,011 |
$5,170 |
$5,527 |
$5,903 |
$6,075 |
$7,982 |
|
DH-68 |
1895# |
1985# |
1985# |
2065# |
2085# |
2185# |
2205# |
2795# |
|
6' x 10' |
$6,031 |
$6,146 |
$6,305 |
$6,471 |
$6,821 |
$7,197 |
$7,370 |
$9,282 |
|
DH-610 |
2210# |
2285# |
2285# |
2365# |
2385# |
2485# |
2505# |
3095# |
|
6.5' x 6' |
$4,635 |
$4,743 |
$4,909 |
$5,068 |
$5,425 |
$5,801 |
$5,973 |
$7,848 |
|
DH-656 |
1800# |
1875# |
1875# |
1955# |
1975# |
2075# |
2095# |
2685# |
|
6.5' x 8' |
$5,011 |
$5,119 |
$5,285 |
$5,444 |
$5,801 |
$6,139 |
$6,343 |
$8,396 |
|
DH-658 |
2125# |
2200# |
2200# |
2280# |
2300# |
2400# |
2420# |
3000# |
|
6.5' x 10' |
$6,305 |
$6,413 |
$6,579 |
$6,745 |
$7,095 |
$7,472 |
$7,644 |
$9,690 |
|
DH-6510 |
2375# |
2450# |
2450# |
2530# |
2550# |
2650# |
2670# |
3260# |
|
7' x 6' |
$4,737 |
$4,845 |
$5,011 |
$5,170 |
$5,527 |
$5,903 |
$6,075 |
$7,982 |
|
DH-76 |
1840# |
1915# |
1915# |
1995# |
2015# |
2115# |
2135# |
2725# |
|
7' x 8' |
$5,145 |
$5,253 |
$5,419 |
$5,585 |
$5,935 |
$6,311 |
$6,483 |
$8,530 |
|
DH-78 |
2150# |
2225# |
2225# |
2305# |
2325# |
2425# |
2445# |
3035# |
|
7' x 10' |
$6,439 |
$6,554 |
$6,713 |
$6,879 |
$7,236 |
$7,605 |
$7,778 |
$9,824 |
|
DH-710 |
2465# |
2540# |
2540# |
2620# |
2640# |
2740# |
2760# |
3350# |
|
Note:
60k CIR levelers hip standard with 18" lip
and 6" bumpers. If wall mounted retraints are to
be added a
minimum of 2" cantilever bracket is required. 24"
Pit standard on all 60k and 10' levelers.
For special service range on 10' and 12' levelers consult
us. |
|
|
COMMON
"DH" OPTIONS
|
|
|
|
Description |
Prices |
|
Nema 12 Controls - N12CB (Interlock Terminals) |
$212.80 |
|
3 Phase Motor (208 & 480 Volts) |
$168.00 |
|
3 Phase Motor (575 Volt) |
$308.00 |
|
Auto Return To Dock/Leveler Stored* |
$280.00 |
|
Quick Cycle Lip Extend Button (Must Select Nema
12 Control Box) |
$280.00 |
|
Quck Cycle Lip Extend/Leveler Stop Button (Must
Select Nema 12 Control Box) |
$336.00 |
|
Mushroom Style Emergency Stop Button |
N/A |
|
Additional Interlock Terminals (Must Select Nema
12 Control Box) |
$140.00 |
|
Grease Fittings |
$106.40 |
|
3-Wheel Lift Truck Protection (Optional for 20k
thru 30k) |
$140.00 |
|
CleanSweep Frame |
No Charge |
|
Rubber Weatherseal (Foam Rear) |
$140.00 |
|
Brush Weatherseal (Brush Rear) |
$168.00 |
|
18" Lip |
$168.00 |
|
20" Lip |
$224.00 |
|
24" Pit Conversion (Factory Installed) |
$252.00 |
|
*Must Select Nema 12 control box. |
|
|
|
|
|
|
OPTIONS
|
|
Description
|
Prices |
|
Yellow Toe Guards
|
$159.38 |
|
Yellow & Black Toe Guard Safety Type
|
$66.30 |
|
Grease Fittings
|
$121.13 |
|
Smooth Deck & Lip
|
$318.75 |
|
Abrasive Finish on Deck & Lip (Includes
Smooth Deck & Lip)
|
$688.50 |
|
Abrasive Finish on Deck & Lip (On 4 Way
Checker Plate)
|
$369.75 |
|
Full Range Toeguards
|
$159.38 |
|
Extended Lip Chamfer
|
$197.63 |
|
Reduced Lip Crown (Range +6" - 8")
|
$153.00 |
|
3-Wheel Fork Truck Protection (Optional for
20k thru 30k)
|
$159.38 |
|
Deduct Dock Bumpers (one pair)
|
-$30.00 |
|
Auto Return to Dock (must select Nema 12 Control
Box)
|
$318.75 |
|
Quick Cycle Lip Extend Button (must select Nema
12 Control Box)
|
$318.75 |
|
Quick Cycle Lip Extend Button/Level Stop Button
(must select Nema 12 Control Box)
|
$382.50 |
|
CleanSweep Frame
|
No Charge |
|
Rubber Weatherseal (Rear Foam)
|
$159.38 |
|
Brush Weatherseal (Rear Brush)
|
$191.25 |
|
24" Pit Conversion (blocked and elevated
frame)
|
$286.88 |
|
18" Lip
|
$191.25 |
|
20" Lip
|
$255.00 |
|
22" Lip
|
Consult us |
|
Foam Insulated Deck
|
$701.25 |
|
Stainless Steel Hinge Pins (Front and rear)
|
$478.13 |
|
Remote Power Pack (Includes 25' Hose & Mounting
Plate)
|
$433.50 |
|
Special Pain Requirements
|
Consult us |
|
Spray Metalized (Deck, Lip & Frame)
|
$2,798.63 |
|
Spray Metalized (Deck, Lip & Frame Hydraulic
Cylinder Casing)
|
$3,181.13 |
|
Hot Dip Galvanized (Deck, Lip & Frame. Note:
Minor Deflection May Occur Druing
Galvanizing Process. Hydraulic Only Min. 45k
Board)
|
Consult us |
|
Gray Touch-up Spray Paint
|
$15.30 |
|
Yellow Touch-up Spray Paint
|
$15.30 |
|
|
|
PIT
DETAIL FOR DH SERIES
|
|
|
|
|
 |
|
|
|
|
Pit
dimensional tolerances are ±1/8” in depth,
width and squareness, -¼” +0 in length.
We assume no liability for deviations beyond this tolerance. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
| Optional
Bumper Plates - in lieu of above |
|
|
|
|
|
11”
wide x 20” high (Qty 2)
11” wide x 24” high (Qty 2)
Other Bumper Embed ___________________ (Qty 2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Pit
Projection Guide for Decline Slope Driveways |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rise
of
Driveway |
|
|
|
|
|
|
|
|
|
|
|
 |
|
Percentage
Of Grade
=
|
|
Driveway
Length |
|
|
|
|
|
|
NOTE:
Projection of pit may require modifications to seals
and shelters.
Coordinate with supplier if required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES
FOR DH SERIES STEEL EMBED ITEMS
|
|
Size |
4 Piece Angle/2 Piece
Bumper Plates
Recommended |
6 Piece Angle |
3 Sided Rapid
Form Pit Kit |
4 Sided Box |
|
6' x 6' |
$351 |
$293 |
$574 |
$733 |
|
Wt. |
201# |
204# |
350# |
430# |
|
6' x 8' |
$363 |
$306 |
$644 |
$803 |
|
Wt. |
233# |
236# |
450# |
530# |
|
6' x 10' |
$389 |
$332 |
$893 |
$1,052 |
|
Wt. |
262# |
265# |
615# |
695# |
|
6' x 12' |
$453 |
$395 |
$1,179 |
$1,339 |
|
Wt. |
292# |
295# |
760# |
840# |
|
7' x 6' |
$357 |
$300 |
$618 |
$778 |
|
Wt. |
215# |
218# |
370# |
450# |
|
7' x 8' |
$376 |
$319 |
$701 |
$861 |
|
Wt. |
245# |
248# |
540# |
620# |
|
7' x 10' |
$414 |
$357 |
$982 |
$1,141 |
|
Wt. |
277# |
280# |
720# |
800# |
|
7' x 12' |
$491 |
$434 |
$1,269 |
$1,428 |
|
Wt. |
306# |
309# |
890# |
970# |
|
|
|
Description |
Prices |
|
Hot Dip Galvanized Angles |
Consult us |
|
Two (2) 11 x 20 Bumper Plates in Lieu of Standard
Height Plates |
$82.88 |
|
Two (2) 11 x 24 Bumper Plates in Lieu of Standard
Height Plates |
$95.63 |
|
Restraint Embed |
$178.50 |
|
Bracket Pit Floor Plate |
$133.88 |
|
Rear Pit Spacers (Factory Install) |
|
1" & 2" |
$178.50 |
|
3" & 4" |
$216.75 |
|
5" & 6" |
$255.00 |
|
7" & 8" |
$306.00 |
|
9" & 10" |
$541.88 |
|
Front Angle Support |
|
1"-3" |
$242.25 |
|
4" |
$280.50 |
|
5" |
$318.75 |
|
Pit Conversions (pit depth) |
|
1" - 4" (Pit from 19 1/2" - 23
1/2") Factory Installed |
$286.88 |
|
5" - 8" |
$828.75 |
|
9" - 12" |
$1,275.00 |
|
*Note may require additional freight |
|
Free Standing Frame With Bumper Supports |
|
6' Long |
$2,613.75 |
|
8' Long |
$3,091.88 |
|
10' Long |
$3,601.88 |
|
12' Long |
$4,335.00 |
|
*Note may require additional freight |
|
Free Standing Frame (Bumpers Excluded) |
|
6' Long |
$1,995.38 |
|
8' Long |
$2,352.38 |
|
10' Long |
$2,734.88 |
|
12' Long |
$3,283.13 |
|
*Note may require additional freight |
|
|
|
|
Specifications
|
|
|
|
|
|
| GENERAL
DESCRIPTION: |
|
STANDARD
OPERATIONAL FEATURES: |
All
DH Series dock levelers incorporate the use of
hydraulics to raise and lower both the platform and
lip. A
single push button activates a hydraulic pump for operating
both lip and hoist cylinders. Unit conforms to OSHA,
U.S.
Department of Commerce Standard CS-202-56 and is
manufactured in compliance with the American National
Standard of Safety Performance and Testing of Dock
Leveling Devices (ANSI) MH 30.1. |
|
|
The
DH Series Leveler is controlled remotely from wall
mounted control panel. An array of optional control
panel features are available. Service range is from
12"
above to 12" below dock level. Lip keepers welded
to
frame members provide nighttime security and crosstraffic
support. Full operating range toe guards are provided
as
standard. Maintenance prop with ‘Lock-out Tag-out’
capability is provided as standard. Factory finish includes
rust inhibitive prime coat industrial grade finish.
Each
leveler is shipped with two (2) (B 410-14) 4½”
thick x
10”h x 14”w laminated bumpers as standard
on all
capacities except the 60,000 CIR which gets 6”
thick
bumpers. |
|
|
| CONSTRUCTION:
|
|
The
platform is constructed of ¼” thick 4-way
high tensile
50,000 minimum yield A572 steel safety treadplate (3/16”
for 20,000 Comparative Industry Rating (CIR)). Platform
is
reinforced and supported by full-length roll formed
“C”
channels (20,000, 25,000 and 30,000 lb CIR), structural
“C” channels (35,000 & 40,000 lb CIR),
and a combination
of structural “C” channels and “I”
beams (45,000, 50,000
and 60,000 lb CIR). Front and rear header plate is of
either
½” x 7” or ½” x 8”
hot rolled steel. DH Series lips are made
of 4-way safety treadplate, the 20,000 and 25,000 lb
CIR
are 1/2” thick, the 30,000, 35,000 and 40,000 lb
CIR are
5/8” thick, and the 45,000 50,000 and 60,000 lb
CIR are
3/4” thick. The standard lip length is 16”
on all capacities
except the 60,000 CIR which is 18”. Hinge tubes
are 1 3/4”
OD x 5/16” wall, 1 7/8” x 3/8” wall,
2 1/8” x ½” wall, or 2
5/8” x 3/4” wall depending upon CIR. All lip
hinge pins are
1” M1044 steel. Steel lip gusset are standard on
50,000
and 60,000 lb CIR models. Steel header gussets are
standard on all models 35,000 lb CIR and above. All
platforms are designed to compensate for up to 4”
of
canted truck beds. |
|
|
|
|
|
|
ELECTRICAL: |
|
Hydraulic
pump motor shall be 1HP TEFC at 115v
single phase. Optional 3 Phase motors are available,
consult factory. Electrical control panel is a non-metallic
Nema 4 enclosure. All electrical components, connections
and wiring are UL listed or recognized. Please Note:
Unless specifically noted on quotation, all electrical
requirements are the responsibility of others. |
|
|
|
|
|
WARRANTY: |
|
All
DH Series models feature a full one (1) year
base warranty on all structural, hydraulic and electrical
parts, including freight and labor charge. Hydraulic
components carry an additional full one (1) year
warranty with parts and labor. Structural components
carry and additional nine (9) year pro-rated warranty.
Warrants all components to be free of defects in materials
and workmanship, under normal use, during the warranty
period. This base warranty period begins upon the
completion of installation or the sixtieth (60th) day
after
shipment, whichever is earlier. Additional warranty
extensions are available upon approved submittal of
application information. |
|
|
| HYDRAULICS: |
|
Platform
is raised by an inverted hydraulic cylinder, all
hydraulic hoses are routed under the leveler platform,
away from debris. Hoist cylinder is hard chrome-plated,
single acting design with 3” OD rod and 3 ½”
ID bore.
Hoist cylinder is equipped with a velocity safety stop
to
limit free fall of loaded platform to 3”(±1”).
Lip operation
is controlled by a hard chrome-plated cylinder having
a
2 ½” ID bore and is fully yieldable. Elevated,
frame
mounted pump and motor assembly keeps clear of debris
accumulation in pit. |
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
DLM,
Dock Leveler, Dock Levelers, Hydraulic Dock Leveler,
Hydraulic Dock Plate, Loading Dock Leveler, Pit Mount
Dock Levelers, Pit
Mounted Dock Leveler, and Pit Mounted Dock Levelers
from your complete source for material handling equipment. |
|
