|
DA
Series Air Powered Dock Leveler
|
|
|
|
|
|
 |
|
|
|
The
"DA" Series leveler
combines the "push-
button" convenience of
hydraulic levelers with
the economics of the
mechanical leveler to
bring value and
performance to your
loading dock. From
superior structural
design to unlimited
operator features, the
"DA" Series air pow-
ered leveler is a wise
investment.. |
|
|
|
|
|
|
|
| Standard
Features Include |
|
|
|
|
|
|
•
Simple Push Button Activation
• High Volume, Low Pressure, Activation System
• Four Sided Box Construction - Deck Assembly
• 115 Volt Single Phase Power
• 16" Lip Plate
• Multi-positon Structural Steel Safety Legs
• Below Dock Endloading Control
|
|
•
Lockout/Tagout Maintenance Strut
• Night Locks/Cross Traffic Support
• 3-wheel Fork Truck Protection (35k + CIR)
• Lip Supporting Service Strut
• Full Range Toe Guards
• Two (2) B410-14 Laminated Bumpers
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
 |
|
Efficient
Power |
|
•
Low pressure, high volume air supply.
• 115v single phase motor.
• Simple installation with fan, filter and
"receptacle type" plug end. |
 |
|
|
|
|
|
|
|
|
|
| Structurally
Superior |
|
|
|
|
|
|
|
|
•
Over 29" of direct rear hinge support - heaviest
in the
industry.
• Four sided box construction provides unmatched
struc-
tural integrity.
• Deck construction is capacity dependent to insure
your
loading bridge matches the demands of the
approved
work load.
• Leveler lip and deck are constructed with high-strength
55,000 lb. yield, safety treadplate.
• Deck support members are application dependent |
|
|
|
|
|
|
Unique
Lip Latch |
|
•
Provides reliable lip extension
activation.
• Positive, full height lip extension for
16", 18" and 20" lip lengths.
• Lip mechanism is fully yieldable in
case of impact with a backing truck. |
 |
|
|
|
|
|
|
|
|
Deck
& Lip Maintenance Struts |
|
•
Permanently mounted, hinged main-
tenance strut supports deck during
maintenance or inspection.
• Maintenance strut is lockout/tagout
capable.
• Lip support strut permits independent
support of lip. |
 |
|
Low
Capacity - Roll form "C" channel
Medium Capacity - Structural "C" channel
Heavy Capacity - Structural "C" channel and
"I" beam |
|
•
Close and consistent spacing of beams provide necessary
support for 3-wheeled and 4-wheeled fork
trucks (35k +
CIR). |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multiposition
Safety Legs |
|
|
|
•
Provides free-fall protection should a
truck depart prematurely..
• Safety legs are sized and positioned
to minimize obstructions during below
dock loading operations. |
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES
FOR DA SERIES MECHANICAL DOCK LEVELER
|
|
Size Model No. |
20,000 CIR |
25,000 CIR |
30,000 CIR |
35,000 CIR |
40,000 CIR |
45,000 CIR |
50,000 CIR |
|
6' x 6' |
$4,484 |
$4,618 |
$4,695 |
$4,850 |
$5,245 |
$5,661 |
$5,852 |
|
DA-66 |
1450# |
1525# |
1545# |
1625# |
1645# |
1745# |
1765# |
|
6' x 8' |
$4,794 |
$4,928 |
$5,006 |
$5,161 |
$5,555 |
$5,971 |
$6,162 |
|
DA-68 |
1740# |
1815# |
1835# |
1915# |
1935# |
2035# |
2055# |
|
6' x 10' |
$6,232 |
$6,359 |
$6,423 |
$6,592 |
$6,987 |
$7,403 |
$7,593 |
|
DA-610 |
2040# |
2115# |
2135# |
2215# |
2235# |
2335# |
2355# |
|
6.5' x 6' |
$4,681 |
$4,815 |
$4,893 |
$5,048 |
$5,443 |
$5,859 |
$6,049 |
|
DA-656 |
1630# |
1705# |
1725# |
1805# |
2510# |
1925# |
1945# |
|
6.5' x 8' |
$5,097 |
$5,231 |
$5,309 |
$5,464 |
$5,859 |
$6,275 |
$6,458 |
|
DA-658 |
1955# |
2030# |
2050# |
2130# |
2150# |
2250# |
2270# |
|
6.5' x 10' |
$6,535 |
$6,662 |
$6,740 |
$6,895 |
$7,290 |
$7,706 |
$7,896 |
|
DA-6510 |
2305# |
2380# |
2300# |
2380# |
2400# |
2500# |
2520# |
|
7' x 6' |
$4,794 |
$4,928 |
$5,006 |
$5,161 |
$5,555 |
$5,971 |
$6,162 |
|
DA-76 |
1670# |
1745# |
1765# |
1845# |
1865# |
1965# |
1985# |
|
7' x 8' |
$5,252 |
$5,379 |
$5,457 |
$5,612 |
$6,007 |
$6,423 |
$6,613 |
|
DA-78 |
1980# |
2055# |
2075# |
2255# |
2175# |
2275# |
2295# |
|
7' x 10' |
$6,683 |
$6,817 |
$6,888 |
$7,050 |
$7,438 |
$7,854 |
$8,044 |
|
DA-710 |
2295# |
2370# |
2390# |
2470# |
2490# |
2590# |
2610# |
|
|
|
PRICES
FOR DA SERIES OPTIONS
|
|
Description |
Prices |
|
Nema 12 Controls - N12CB (Interlock Terminals) |
$409 |
|
Grease Fittings |
$134 |
|
Rubber Weatherseal (Foam Rear) |
$176 |
|
Brush Weatherseal (Brush Rear) |
$212 |
|
18" Lip |
$212 |
|
20" Lip |
$282 |
|
Barrier Lip (B-2) Minimum 8'0" Long Levelers
with 5" |
$2,397 |
|
24" Pit Conversion (Factory Installed) |
$317 |
|
3-Wheel Lift Truck Protection (Optional for 20k
thru 30k) |
$176 |
|
|
|
Description |
Prices |
|
Yellow Toe Guards
|
$176.25 |
|
Yellow & Black Toe Guard Safety Type
|
$73.32 |
|
Grease Fittings
|
$133.95 |
|
Smooth Deck & Lip
|
$352.50 |
|
Abrasive Finish on Deck & Lip (Includes
Smooth Deck & Lip)
|
$761.40 |
|
Abrasive Finish on Deck & Lip (On 4 Way
Checker Plate)
|
$408.90 |
|
Full Range Toeguards
|
$176.25 |
|
B2 Barrier Lip (Smooth Transition with Debris
Screen)
|
$2,397.00 |
|
Extended Lip Chamfer
|
$218.55 |
|
Reduced Lip Crown (Range +6"-8")
|
$169.20 |
|
3-Wheel Fork Truck Protection (Optional for
20k thru 35k)
|
$176.25 |
|
Deduct Dock Bumpers (one pair)
|
-$30.00 |
|
Rubber Weatherseal (Foam Rear)
|
$176.25 |
|
Brush Weatherseal (Foam Rear)
|
$211.50 |
|
24" Pit Conversion (blocked and elevated
frame)
|
$317.25 |
|
18" Lip
|
$211.50 |
|
20" Lip
|
$282.00 |
|
Foam Insulated Deck
|
$775.50 |
|
Stainless Steel Hinge Pins (Front and rear)
|
$528.75 |
|
Special Paint Requirements (Optional)
|
Consult us |
|
Spray Metalized (Deck, Lip & Frame)
|
$3,094.95 |
|
Gray Touch-up Spray Paint
|
$16.92 |
|
Yellow Touch-up Spray Paint
|
$16.92 |
|
|
|
PIT
DETAIL
|
|
|
|
|
 |
|
|
|
|
Pit
dimensional tolerances are ±1/8” in depth,
width and squareness, -¼” +0 in length.
We assume no liability for deviations beyond this tolerance. |
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
| Optional
Bumper Plates - in lieu of above |
|
|
|
|
11”
wide x 20” high (Qty 2)
11” wide x 24” high (Qty 2)
Other Bumper Embed ___________________ (Qty 2) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Pit
Projection Guide for Decline Slope Driveways |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rise
of
Driveway |
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
Percentage
Of Grade
=
|
|
|
Driveway
Length |
|
|
|
|
|
|
NOTE:
Projection of pit may require modifications to seals
and shelters.
Coordinate with supplier if required. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PRICES
FOR DA SERIES STEEL EMBED ITEMS
|
|
Size |
4 Piece Angle/2 Piece
Bumper Plates
Recommended |
6 Piece Angle |
3 Sided Rapid
Form Pit Kit |
4 Sided Box |
|
6' x 6' |
$388 |
$324 |
$635 |
$811 |
|
Wt. |
201# |
204# |
350# |
430# |
|
6' x 8' |
$402 |
$338 |
$712 |
$888 |
|
Wt. |
233# |
236# |
450# |
530# |
|
6' x 10' |
$430 |
$367 |
$987 |
$1,163 |
|
Wt. |
262# |
265# |
615# |
695# |
|
6' x 12' |
$501 |
$437 |
$1,304 |
$1,481 |
|
Wt. |
292# |
295# |
760# |
840# |
|
7' x 6' |
$395 |
$331 |
$684 |
$860 |
|
Wt. |
215# |
218# |
370# |
450# |
|
7' x 8' |
$416 |
$353 |
$776 |
$952 |
|
Wt. |
245# |
248# |
540# |
620# |
|
7' x 10' |
$458 |
$395 |
$1,086 |
$1,262 |
|
Wt. |
277# |
280# |
720# |
800# |
|
7' x 12' |
$543 |
$479 |
$1,403 |
$1,579 |
|
Wt. |
306# |
309# |
890# |
970# |
|
|
|
|
Description |
Price |
|
Hot Dip Galvanized Angles
|
Consult us |
|
Two (2) 11 x 20 Bumper Plates in Lieu of Standard
Height Plates
|
$91.65 |
|
Two (2) 11 x 24 Bumper Plates in Lieu of Standard
Height Plates
|
$105.75 |
|
Restraint Embed
|
$197.40 |
|
Bracket Pit Floor Plate
|
$148.05 |
|
Rear Pit Spacers (Factory
Install) |
|
1" & 2" |
$197.40 |
|
3" & 4" |
$239.70 |
|
5" & 6" |
$282.00 |
|
7" & 8" |
$338.40 |
|
9" & 10" |
$599.25 |
|
Pit Conversions (pit depth) |
|
1" - 4" (Pit From 19 1/2" - 23
1/2") Factory Installed |
$317.25 |
|
5" - 8" |
$916.50 |
|
9" - 12" |
$1,410.00 |
|
*Note may require additional Freight |
|
Free Standing Frame With
Bumper Supports |
|
6' Long |
$2,749.50 |
|
8' Long |
$3,278.25 |
|
10' Long |
$3,842.25 |
|
12' Long |
$4,653.00 |
|
*Note may require additional Freight |
|
Deep Pit Stands (Bumpers
Excluded) |
|
6' Long |
$2,065.65 |
|
8' Long |
$2,460.45 |
|
10' Long |
$2,883.45 |
|
12' Long |
$3,489.75 |
|
*Note may require additional Freight |
|
|
|
Specifications
|
|
|
|
|
|
| GENERAL
DESCRIPTION: |
|
STANDARD
OPERATIONAL FEATURES: |
All
DA Series dock levelers incorporate the use of a low
pressure, high volume air system to raise and lower
the
platform. Unit conforms to OSHA, U.S. Department of
Commerce Standard CS-202-56 and is manufactured in
compliance with the American National Standard of Safety
Performance and Testing of Dock Leveling Devices
(ANSI) MH 30.1. |
|
|
The
DA Series Leveler is controlled remotely from wall
mounted control panel. An array of optional control
panel
features are available. Service range is from 12”
above
to 12” below dock level. Lip keepers welded to
frame
members provide nighttime security and crosstraffic
support. Full operating range toe guards are provided
as
standard. Maintenance prop with ‘Lock-out Tag-out’
capability is provided as standard. Factory finish includes
rust inhibitive prime coat industrial grade finish.
Special
coating and colors are optional. Each leveler is shipped
with two (2) (B 410-14) 4½” thick x 10”h
x 14”w
laminated bumpers as standard. |
|
|
|
| CONSTRUCTION:
|
|
The
platform is constructed of ¼” thick 4-way
high tensile
50,000 minimum yield A572 steel safety tread-plate (3/16”
for 20,000 Comparative Industry Rating (CIR)). Platform
is
reinforced and supported by full-length roll formed
“C”
channels (20,000, 25,000 and 30,000 lb CIR), structural
“C” channels (35,000 & 40,000 lb CIR),
and a combination
of structural “C” channels and “I”
beams (45,000 and
50,000 lb CIR). Front and rear header plate is ½”
x 7” hot
rolled steel. DA Series lips are made of 4-way safety
tread-plate, the 20,000 and 25,000 lb CIR are 1/2”
thick,
the 30,000, 35,000 and 40,000 lb CIR are 5/8” thick,
and
the 45,000 and 50,000 lb CIR are 3/4” thick. The
standard
lip length is 16” on all capacities. Hinge tubes
are 1 3/4” OD
x 5/16” wall, 1 7/8” x 3/8” wall, or
2 1/8” x ½” wall,
depending upon CIR. All lip hinge pins are 1” M1044
steel.
Steel lip gusset are standard on 50,000 lb CIR models.
Steel
header gussets are standard on all models 35,000 lb
CIR
and above. All platforms are designed to compensate
for up
to 4” of canted truck beds. |
|
|
|
|
|
ELECTRICAL: |
|
Electric
blower motor shall be 115v single phase, 1400
watt drawing 11 amps at startup. Optional voltage motors
are available, consult factory. Electrical control panel
is
non-metallic Nema 4 enclosure. All electrical components,
connections and wiring are UL listed or recognized.
Please
Note: Unless specifically noted on quotation, all electrical
requirements are the responsibility of others. |
|
|
|
|
WARRANTY: |
|
All DA
Series models feature a full one (1) year base
warranty on all structural, pneumatic and electrical
parts,
including freight and labor charges in accordance
with Standard Warranty Policy. Lifting system, including
air
bladder, seals, hoses and motor carry an additional
full
four (4) year warranty on parts and labor. Structural
components carry and additional nine (9) year pro-rated
warranty. Warrants all components to be free of defects
in materials and workmanship, under normal use, during
the warranty period. This base warranty period begins
upon the completion of installation or the sixtieth
(60th)
day after shipment, whichever is earlier. Additional
warranty extensions may be available upon approved
submittal of application information.
|
|
|
|
| OPERATION: |
|
Platform
is raised by an electric blower motor filling an air
bladder which provides upward lift of the platform.
The lip
is extended and secured in place with Lip Drive™
positive
lip extension. Releasing the raise button allows the
platform
to float downward to the truck bed. No manual lifting
is
required. Elevated, frame mounted air bladder assembly
keeps clear of debris accumulated in the pit. |
|
|
|
|
|
|
|
|
|
|
